The ultra-light Marker Alpinist pin binding (245 g not including brake) offers everything experienced touring skiers need. Its construction allows active length compensation without affecting the skiÂ’s flex.
A very stiff, ISI front makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Kinematically optimised pin levers then allow the pins to snap shut with just a gentle push.
The heel features 0°, 5° and 9° climbing aids and can be switched quickly and easily from ascent to descent mode. A 38 mm wide hole pattern transfers power of the Marker Alpinist brilliantly to the edges, which means control and great steering.
Features:
- DIN range: 4.0 - 10.0
- Rec. skierÂ’s weight: max. 110 kg
- Toe system: ISI Toe
- Heel: Alpinist Heel – soft U-bow
Technology:
Alpinist HeelAlpinist heel with adjustable lateral release with different DIN options and 15mm of heel adjustment range (+-7,5mm). Offers three walking modes thanks to the hot forged aluminium climbing aid. The “Fast Shift Mode” enables quick shifting between neutral and highest walking mode. The active length compensation in the heel allows consistent power transmission and release performance, even when the ski is flexed.”
Climbing Aids AlpinistNeutral walking mode and two climbing aids offering 5° and 9°. The fast shift mode enables quick shifting between 0° and 9° without the need to rotate the heel.
Active Length CompensationActive length compensation in the heel allowing the heel to move back up to 4 mm when the ski is flexed.
Ise ToeRubber stop pad: Boot tip is aligned/stopped when stepping in.Wider step-in platform: Enlarged contact area for boot sole when stepping in.Easier step-in: Toe piece “snaps/clicks into the boot” with a lot less force required.
